High Mark Bulkheads

	We use 14-gauge galvanized rectangular steel tube construction welded at every joint. Support posts are placed between washer gaps so as not to interfere with any service work. All steel is galvanized coated to withstand the test of time in your coin laundry. Upright supports are 1" wide to allow easy access to back panel screws
	All copper is Type "L" and meets all UPC as well as national plumbing codes. One ball valve per washer inlet on all our bulkheads. All water lines are installed with adjustable clamps attached to unistrut, for ease of adjustment in the field. All copper fittings are pro press fittings clamped to the pipe and sealed with an "O" ring. All fittings are warranted for 50 years.
	High Mark is proud to offer AQUAPEX® tubing standard on all bulkheads now. AQUAPEX tubing is very durable and has a life expectancy of 100 years and is able to withstand harsh chemicals such as chlorine. It will not corrode, pit or scale like copper tubing. Also this tubing won't leak toxins into the water like copper. This tubing also allows us to use our new specially designed valve manifold to keep the clutter of the bulkheads to a minimum. AQUAPEX creates a noise-less system and dampens the sound of rushing water and eliminates water hammer problems. Best of all, AQUAPEX tubing comes with a 25-year limited warranty when installed by a Wirsbo-trained professional such as High Mark Manufacturing.
	All electrical boxes and pipe runs are located at the top of the bulkhead keeping the center open for easy service access. Wire runs are continuous from circuit breaker to machines without splices and/or wire nuts.
	Electrical outlets are provided for 110-volt plug in type washers. Each washer has its own individual breaker per manufacturers' recommendations.
	Electrical whips are provided for each hard-wired machine. One whip per machine is provided and is wired continuous back to the circuit breaker. 208/240-Volt 3-phase or 240-Volt single-phase are options depending on the electrical requirement needs.
	Circuit breaker panels can be located at either end of the bulkhead depending on the feed from your location. The box is positioned to be flush with your end panel cover. Whips may be installed in the electrical panel to reduce the amount of pipe runs in your bulkhead.
	All electrical components are top of the line name brand components and carry full warranties. Circuit breakers are sized as per manufacturers' specifications.
	Circuit breaker panels can also be located on the top of the bulkhead. Horizontal-mounted circuit breaker panels allow easy access to the inside of the bulkhead if one end is obstructed by a wall or permanently mounted furniture.
	All tops are 3/4" thick waterproof medex panels. Standard panels consist of a melamine finish fused to both sides. Standard panels can be either side up. Edging on all the panels is a PVC-edge band fused to the panel core. Edgebanding comes in a variety of colors.
	Upgrading to a high-pressure laminate is an option. High-pressure laminate comes in a variety of colors. End panel access doors are an option for ease of maintenance. Access doors are mounted on a continuous piano hinge and latched with a keyed lock.
	All top panels are designed to be located 1" higher than the tallest washer (including the base). End panels are 4" wider on each side of the bulkhead to hide the gap between the washing machines and the bulkhead. End panels are designed to be 1/2" from the end of the last machine. These are standard dimensions. All bulkheads are custom built so if you have a different design in mind please present it prior to placing an order.